Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

HD Radio Time Alignment Tip

HD Radio Time Alignment Tip

May 1, 2009 12:00 PM, By Chriss Scherer

Because of the time delay in the digital portion of the HD Radio audio path, the analog audio component of the hybrid signal has to be delayed to match the digital. When the alignment is just right, the transitional blend from analog to digital or back can be almost transparent. However, if the alignment is off by even 1 millisecond, listeners will hear the transition. Likewise, a difference in audio level between the two signals can cause problems.

Brian Beezley has documented the audible effects of misaligned time delay and mismatched audio to show the effects. He has even written a small program to compare the analog and digital signals so the best alignment can be found. His program runs in DOS or from the command line. It uses the computer’s sound card and an HD Radio tuner than can split the audio into analog on one channel and digital on the other. The results of the program indicate time alignment, level differences and phase relationship.

Beezley’s site has lots of useful information, so look around while you’re there.

ham-radio.com/k6sti/roster.htm

Do you have a tech tip? Send it to us at [email protected]

Poor Man’s Satellite Dish Deicer

After years of relying on the broom method and not having the budget to invest in a commercial deicer, KLJC engineer Glenn Williams devised his own way to keep the ice away….

A Better Method of Line Pressurization

The author prefers nitrogen over dessicated air, but he adds two more steps to manage the pressure….

Close