JK Audio BlueDriver Series
Jun 1, 2010 12:00 PM, Reported by Erin Shipps, associate editor
Wireless audio interfaces
The BlueDriver series of audio interface adapters uses Bluetooth wireless technology. BlueDriver-F3 plugs directly into a dynamic mic or the mic-level output from a mixing console. Pair it to a Bluetooth-equipped cell phone or headset. The 3.5mm stereo jack contains a mic-level output suitable for recording, with the clean mic signal on the left channel and the Bluetooth return on the right. BlueDriver-M3 plugs into the mic input channel of a mixer. The 3.5mm jack will accept a signal from the headphone output of the mixer for transmission back to the cell phone or headset. A switch on either unit selects between connection to a third-party Bluetooth headset, or a cell phone.
What the judges had to say:
“JK Audio has again found a niche for Bluetooth use.”
“Ideal for remote broadcasts by pairing with a cell phone, and it keeps the reporter looking professional.”
800-552-8346
[email protected]
www.jkaudio.com
Do you have experience with this product? Share your comments below.
2010 Pick Hits
The 15 top new products of the 2010 NAB Show as selected by the Pick Hits panel of radio engineers….
2010 Pick Hits Rules
The Radio magazine Pick Hits are selected by following an established set of rules….
2010 Pick Hits Judges
The Radio magazine Pick Hits are selected by a panel of radio broadcast engineers. Unlike other convention awards, we tell you who the judges are….
