Toolbox 7 -- Heavy Tools in a Toughstuff Large Wrench Case - Radio World

Toolbox 7 -- Heavy Tools in a Toughstuff Large Wrench Case

This box contains heavy work tools and for this reason does not always travel with me especially since it weighs almost 50 pounds!!!IN TOP CARRIER Quan. Description Notes on tool 1x AMP BNC high compression coax connector crimp tool model 6065 with changeable dies   1x BUSS Fuse puller model FP-3 This is a
Author:
Publish date:

This box contains heavy work tools and for this reason does not always travel with me especially since it weighs almost 50 pounds!!!

IN TOP CARRIER

Quan.

Description

Notes on tool

1x

AMP BNC high compression coax connector crimp tool model 6065 with changeable dies

 

1x

BUSS Fuse puller model FP-3

This is a plastic (intrinsically safe) cartridge fuse puller for fuse sizes between 1 and 1 3/4 inch, which is the most ordinary size for transmitter and pump fuse inputs

1x

BUSS Fuse puller model FP-4

This is a plastic (intrinsically safe) cartridge fuse puller for fuse sizes between 1 3/4 inch and 2 inch, which is for big size transmitter and pump fuse inputs

1x

GREENLEE 3/4 inch 'slugbuster' conduit punch with 3/4 inch, high torque bolt and ball bearing pressure spacer

 

1x

GREENLEE 1 inch 'slugbuster' conduit punch with 3/4 inch, high torque bolt and ball bearing pressure spacer

 

1x

CAL-HAWK 1/2 inch drive micrometer adjustable torque wrench

 

1x

CRAFTSMAN 3/4 inch fixed ratchet driver with flip head model VVH-4431

This is primarily for operating the conduit punches but I have also used it to tighten down or loosen the bolts associated with tower top antenna mounting poles

1x

CRAFTSMAN 1 inch socket for the 3/4 inch ratchet above model G-47773

This size is for the 3/4-inch bolts used in the conduit punches

1x

CRAFTSMAN 1 1/8 inch socket for the 3/4 inch ratchet above model 19-47775

This size is for the ordinary 3/4 inch tower bolt

1x

CRAFTSMAN 3/8ths to 15/15ths inch small socket set for the 3/4-inch ratchet above model 34450

 

1x

CHALLENGER 3/4 inch female to 1/2 inch male socket drive adapter model 1653

 

1x

ORBIT SPRINKLERS water pressure gauge 0-200 psi

This gauge is for checking the water pressure available to see if we have sufficient pressure/flow for water cooler dummy loads and fire sprinklers




1x

3/4 inch by 3 inch long with 16 thread extra high strength tower bolt for 'true-ing up' worn nuts

 




x

coax connectors for the crimp tool mentioned above

 



IN BOTTOM OF BOX

Quan.

Description

Notes on tool

1x

GREENLEE 2 1/2 inch 'slugbuster' conduit punch with 3/4 inch, high torque bolt and ball bearing pressure spacer

 

1x

GREENLEE 2 inch 'slugbuster' conduit punch with 3/4 inch, high torque bolt and ball bearing pressure spacer

 

1x

GREENLEE 1 1/2 inch 'slugbuster' conduit punch with 3/4 inch, high torque bolt and ball bearing pressure spacer

 

1x

CRAFTSMAN heavy-duty pipe wrench with 2 1/2-inch jaws and 18 inch work length model 51653

 

1x

CRAFTSMAN wrench set from 1/4 to 3/4 inch with open on one end and 12 point closed on the other -- 9 wrenches mounted on carry pack

 

Related

Toolbox 8 -- Precision Tools in a Hard-shell Makeup Case

This box contains precision tools and sometimes doubles as a forensic assortment which I take along on due diligence or on electrical inspection as it provides the minimum needed to investigate basic power quality problems Quan. Description Notes on tool 1x Fluke model 111 meter The raison detre for this meter is

Help Your Children Learn Safely

Recently I rendezvoused with an engineer at his station that was 'off the air'. Our mutual desire was to get the transmitter back on in as short a time as possible. Those $1100.oo spots were coming up at dawn and we both wanted them to run.