Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Armstrong TRX-HD Suitable for Digital Transition

The TRX-HD receives an FM station’s entire signal payload over the air, including its HD Radio digital component.

Armstrong Transmitter is showing its TRX-HD series of FM translators, which it says are designed to transition with a station as it transitions from analog-only broadcasting to the digital hybrid mode and eventually to broadcasting in full digital.

The TRX-HD receives an FM station’s entire signal payload over the air, including its HD Radio digital component. The signal content is transferred to the TRX-HD transmit site for retransmission on the translator frequency.

Features include front-panel frequency agility with LCD screens that independently display the parameters of the receiver and transmitter sections, while complete parameters are available via RS-232 and DB-25 connectors on the rear panel for remote control.

The TRX-HD is available at three power levels. The TRX-HD10 provides 10 watts in the digital hybrid mode; the TRX-HD50 provides 50 digital hybrid watts and the TRX-HD100 is a 100-watt digital hybrid translator. Armstrong says higher hybrid power levels are achieved by adding a solid-state amplifier to the TRX-HD10.

The translators also can be used as analog-only translators at 30, 150 and 300 watts respectively for stations that have not yet begun broadcasting an HD Radio component.

For more information, contact Armstrong Transmitter stop by the company’s booth or visit www.armstrongtx.com.

Close