All-Digital AM Signal Called ‘Solid’ in Testing
David Layer speaks at the NAB Show. Photo by Jim Peck
One in a series of articles exploring news developments at the recent NAB Show.
More details emerged
about the all-digital field tests at CBS Radio station WBCN(AM), Charlotte,
NAB Senior Director of Advanced Engineering David Layer said “solid” all-digital
coverage was received, on average, out to about 40 miles daytime and 11 miles nighttime.
matter which all-digital recording you’ve got. They all sound exactly the same.
It’s clear to me after this test it doesn’t matter where you take the
all-digital recording. It’s a noise-free signal,” he said during a session at
the NAB Show, emphasizing that the results should be considered preliminary.
FCC Commissioner Ajit
Pai said in a separate session he was able to listen to a test recording and
that the all-digital AM audio “was incredible.”
For daytime operation, the all-digital signal
was solid beyond the 1 mV/m contour, and for nighttime beyond the 5 mV/m
Surprisingly, nighttime performance appeared
to be compromised by the presence of co-channel interference, which was not
expected on an expanded-band AM station. Layer said the team believes a nearby
co-channel station may not have been fully powering down for nighttime
This image is from Layer’s Broadcasting Engineering Conference presentation. He reported that the typical experience on each test route was that all-digital reception would be solid, with no dropouts, in strong signal areas near the transmit antenna, and would stay solid ‘with only an occasional dropout’ until near the all-digital point of failure, at which point reception would become intermittent and then be lost. Data from a Ford Sync receiver is shown, for daytime reception.
all-digital indoor reception was achieved for daytime and nighttime locations
within approximately 13 and 7 miles, respectively, of the transmit antenna
WBCN is a 10 kW day/1 kW night non-directional
expanded-band station. Its main transmitter is a Harris DX-10 fed by a Harris
Dexstar exciter. As Radio World has reported, personnel from NAB, iBiquity
Digital, Harris, Kintronic Labs and Meintel, Sgrignoli & Wallace
participated in the testing. They drove seven routes during the day and eight
at night, in a Ford Focus equipped with a Sync HD Radio receiver. They drove
along each route to establish where the digital signal failed.
IBiquity Digital Field
Test & Implementation Manager Russ Mundschenk said Layer rented a Ford Edge
and followed behind the Focus “so we knew the radio was not impacted by the
Testers used an Insignia Narrator HD Radio receiver
to gather signal strength measurements at 15 indoor locations including steel,
wood and masonry construction.
The project team is analyzing the field
strength measurements and audio recordings obtained during the tests, and said
it expects to make this information available to the industry when the analysis
NAB Labs is also looking for more stations for the next round of
Asked whether HD Radios now in the field
could decode the iBiquity all-digital signal, CBS Radio Senior Vice President
of Engineering Glynn Walden said yes, except for “pocket-sized radios.”
Receive regular news and technology updates. Sign up for our free newsletter here.